Everything you need to know about the bypass of the iCloud Activation lock with the IMEI code will be elaborated in this short article, so without further ado let's get started.
The importance and function of the IMEI
Every modern phone has the International Mobile Equipment Identity (IMEI) number. It consists of 15 different digits, and its purpose is to distinguish one phone from another. It doesn't matter from which manufacturer you have bought your device from because all of them have it.- Screens 4 6 6 – Access Your Computer Remotely Unlock Phone
- Screens 4 6 6 – Access Your Computer Remotely Unlock Phone
See Also: - Apple TV 4/2/3 Jailbreak Kodi Solution and Step by Step Instructions
- Screen sharing and Apple Remote Desktop screen sharing are compatible with Virtual Network Computing (VNC), an industry standard for controlling computers remotely on a network using TCP/IP. See also Share the screen of another Mac If you can't share Mac computer screens Share your Mac screen, files, and services with other users on your network.
- How to fix black screen with desktop access on Windows 10. If you see a black screen after signing into Windows 10 and can still use the mouse pointer, it could be a problem with the Windows.
Nov 01, 2006 In this article, I'll show a method/hack that allows you to 'unlock' a locked Windows 2003, XP, or 2000 computer (see Figure 1) without knowing the logged-on user's password and without logging that user off. Along the way, we'll use some mildly-thrilling techniques such as DLL injection, remote Windows Service creation, and embedding.
Where can I find the IMEI number?
Different manufacturers apply different methods to use in case you want to find the IMEI code.However, there is one universally accepted method which you can use, and that is to search under the battery casing of the device on the SIM card tray. Some other models have this code inscribed inside the bottom phone cover.
If these methods don't help you find the IMEI code, then you can try some of the alternative solutions such as to open the Settings menu of your handset, go to General>>About. The code should be displayed at the bottom of the page.
Another method which you can use is to open your mobile phone dial pad and dial the number *#06#. If the device has clean IMEI, the number will be displayed for several seconds.
And the last method to find the IMEI code is to use iTunes. Just connect the iPhone and computer and start iTunes. Next, press on 'Summary' and your iPhone's IMEI will be shown.
IPhone's iCloud IMEI check
To use iCloud on your iPhone, you will have to check the IMEI. And if you have locked the iCloud account, you will have to know the IMEI code and write it down somewhere because it will be required during the unlock procedure.Official iPhone iCloud Unlock solution with IMEI
Brief Introduction
During your search for the most favorable iCloud IMEI unlock service, you may come across different online providers and websites that offer you IMEI check for iCloud as well as iCloud activation unlock. You may also notice that some of the services claim that they can do the job for free, while some may charge you hefty fees for it. Also, in some cases, you may be asked to download some particular programs and install them on your computer before you can begin with the unlock.See Also: -Top 9 iPhone Fake Text Message Generator Tools
However, if we compare them to the official iPhone iCloud unlock service, we can all come to the conclusion that they are not even close to their efficiency.
Why use the official IMEI iPhone iCloud Unlock method?
This particular method has many advantages over the competition simply because it is an online process which requires absolutely no download or installation of any files. In a matter of fact, the only requirement is to know the IMEI code of the compromised iPhone, to have a valid email address and to use some reliable payment method such as PayPal.This method is cheap and affordable, and it comes with a lifelong guarantee.
The entire iCloud Unlock time frame last from one to three business days maximum.
ICloud Activation lock quick unlock info
This service, unlock icloud lock offers you the chance to check the IMEI number of your device and to remove the lock which prevents you from using your iCloud account.In the final chapter of this short article, we have the complete instructions on how to unlock the iCloud activation lock easily.
4 Simple steps for iPhone Unlock
- 1st step: - If you wish to unlock the iCloud activation lock, then you will need to go to the official iPhone Unlock page. From there click the tab 'iCloud Unlock' and the bypassing of the activation lock will begin.
Screens 4 6 6 – Access Your Computer Remotely Unlock Phone
Before you initiate, please make sure that you have checked and written down the IMEI number of your handset because it will be required.See Also: -9 Secret iPhone Interrogation Codes You Might Don't Know
Once you are at the web page interface, a list of various devices will be generated. This list includes all of the devices which can be iCloud unlocked with this method. Just scroll down thru the list and choose your handset model and enter its IMEI number in the provided field. Once you have, press the tab 'Add to Cart'.
- 2nd step: - In the next part, you will need to submit your contact details. It means that once you have provided the IMEI number of the device, you will be shown a new interface with an option 'Add email'. In the field add a valid email address and press the button 'Continue'. In case you have more than one Apple device you wish to unlock, then you also have the option to select 'Add more unlocks to your cart'. Once you are okay with your selection press on 'Continue'.
- 3rd step: - The next step will require that you finish the payment for the iCloud Unlock. There are several methods available, and you can select the one which suits your preferences the best. All of the transactions made are extremely safe and encrypted by NochEX, so do not worry about possible credit card fraud or theft.
- 4th step: - The last step of the iCloud Unlock procedure is to verify the unlock. Once your iCloud account has been made lock free, you will be sent an email from our company to inform you that the procedure has been completed.
Screens 4 6 6 – Access Your Computer Remotely Unlock Phone
Generally, for the iCloud Unlock of your iPhone with IMEI to be completed, it takes from 1-3 business days. Once, this time has elapsed your device should be unlocked.-->Applies to
- Windows 10
This topic for the IT professional describes how BitLocker Network Unlock works and how to configure it.
Network Unlock was introduced in Windows 8 and Windows Server 2012 as a BitLocker protector option for operating system volumes. Network Unlock enables easier management for BitLocker enabled desktops and servers in a domain environment by providing automatic unlock of operating system volumes at system reboot when connected to a wired corporate network. This feature requires the client hardware to have a DHCP driver implemented in its UEFI firmware.Without Network Unlock, operating system volumes protected by TPM+PIN protectors require a PIN to be entered when a computer reboots or resumes from hibernation (for example, by Wake on LAN). This can make it difficult to enterprises to roll out software patches to unattended desktops and remotely administered servers.
Mailtab pro for gmail 5 9. Network Unlock allows BitLocker-enabled systems with TPM+PIN and that meet the hardware requirements to boot into Windows without user intervention. Network Unlock works in a similar fashion to the TPM+StartupKey at boot. Rather than needing to read the StartupKey from USB media, however, the key for Network Unlock is composed from a key stored in the TPM and an encrypted network key that is sent to the server, decrypted and returned to the client in a secure session.
This topic contains:
Network Unlock core requirements
Network Unlock must meet mandatory hardware and software requirements before the feature can automatically unlock domain joined systems. These requirements include:
- You must be running at least Windows 8 or Windows Server 2012.
- Any supported operating system with UEFI DHCP drivers can be Network Unlock clients.
- Network Unlock clients must have a TPM chip and at least one TPM protector.
- A server running the Windows Deployment Services (WDS) role on any supported server operating system.
- BitLocker Network Unlock optional feature installed on any supported server operating system.
- A DHCP server, separate from the WDS server.
- Properly configured public/private key pairing.
- Network Unlock Group Policy settings configured.
The network stack must be enabled to use the Network Unlock feature. Equipment manufacturers deliver their products in various states and with different BIOS menus, so you need to confirm that the network stack has been enabled in the BIOS before starting the computer.
Note
To properly support DHCP within UEFI, the UEFI-based system should be in native mode without a compatibility support module (CSM) enabled.
For Network Unlock to work reliably on computers running Windows 8 and later, the first network adapter on the computer, usually the onboard adapter, must be configured to support DHCP and used for Network Unlock. This is especially worth noting when you have multiple adapters, and you wish to configure one without DHCP, such as for a lights-out management protocol. This configuration is necessary because Network Unlock will stop enumerating adapters when it reaches one with a DHCP port failure for any reason. Thus, if the first enumerated adapter does not support DHCP, is not plugged into the network, or fails to report availability of the DHCP port for any reason, then Network Unlock will fail.
The Network Unlock server component installs on supported versions of Windows Server 2012 and later as a Windows feature using Server Manager or Windows PowerShell cmdlets. The feature name is BitLocker Network Unlock in Server Manager and BitLocker-NetworkUnlock in Windows PowerShell. This feature is a core requirement. Notelife 1 0 5 – premium note manager resume.
Network Unlock requires Windows Deployment Services (WDS) in the environment where the feature will be utilized. Configuration of the WDS installation is not required; however, the WDS service needs to be running on the server.
The network key is stored on the system drive along with an AES 256 session key, and encrypted with the 2048-bit RSA public key of the unlock server's certificate. The network key is decrypted with the help of a provider on a supported version of Windows Server running WDS, and returned encrypted with its corresponding session key.
Network Unlock sequence
The unlock sequence starts on the client side, when the Windows boot manager detects the existence of Network Unlock protector. It leverages the DHCP driver in UEFI to obtain an IP address for IPv4 and then broadcasts a vendor-specific DHCP request that contains the network key and a session key for the reply, all encrypted by the server's Network Unlock certificate, as described above. The Network Unlock provider on the supported WDS server recognizes the vendor-specific request, decrypts it with the RSA private key, and returns the network key encrypted with the session key via its own vendor-specific DHCP reply.
On the server side, the WDS server role has an optional plugin component, like a PXE provider, which is what handles the incoming Network Unlock requests. The provider can also be configured with subnet restrictions, which would require that the IP address provided by the client in the Network Unlock request belong to a permitted subnet in order to release the network key to the client. In instances where the Network Unlock provider is unavailable, BitLocker fails over to the next available protector to unlock the drive. In a typical configuration, this means the standard TPM+PIN unlock screen is presented to unlock the drive.
The server side configuration to enable Network Unlock also requires provisioning a 2048-bit RSA public/private key pair in the form of an X.509 certificate, and for the public key certificate to be distributed to the clients. This certificate must be managed and deployed through the Group Policy editor directly on a domain controller with at least a Domain Functional Level of Windows Server 2012. This certificate is the public key that encrypts the intermediate network key (which is one of the two secrets required to unlock the drive; the other secret is stored in the TPM).
Phases in the Network Unlock process
- The Windows boot manager detects that a Network Unlock protector exists in the BitLocker configuration.
- The client computer uses its DHCP driver in the UEFI to obtain a valid IPv4 IP address.
- The client computer broadcasts a vendor-specific DHCP request that contains:
- A Network Key (a 256-bit intermediate key) encrypted using the 2048-bit RSA Public Key of the Network Unlock certificate from the WDS server.
- An AES-256 session key for the reply.
- The Network Unlock provider on the WDS server recognizes the vendor-specific request.
- The provider decrypts it with the WDS server's BitLocker Network Unlock certificate RSA private key.
- The WDS provider then returns the network key encrypted with the session key using its own vendor-specific DHCP reply to the client computer. This forms an intermediate key.
- The returned intermediate key is then combined with another local 256-bit intermediate key that can only be decrypted by the TPM.
- This combined key is used to create an AES-256 key that unlocks the volume.
- Windows continues the boot sequence.
Configure Network Unlock
The following steps allow an administrator to configure Network Unlock in a domain where the Domain Functional Level is at least Windows Server 2012.
Configure Group Policy settings for Network Unlock
Subnet policy configuration files on WDS Server (Optional)
Troubleshoot Network Unlock
Troubleshooting Network Unlock issues begins by verifying the environment. Many times, a small configuration issue will be the root cause of the failure. Items to verify include: https://xensites.weebly.com/mac-app-blocker-3-2-1-password-protect-apps.html.
Verify client hardware is UEFI-based and is on firmware version is 2.3.1 and that the UEFI firmware is in native mode without a Compatibility Support Module (CSM) for BIOS mode enabled. Do this by checking that the firmware does not have an option enabled such as 'Legacy mode' or 'Compatibility mode' or that the firmware does not appear to be in a BIOS-like mode.
All required roles and services are installed and started
Public and private certificates have been published and are in the proper certificate containers. The presence of the Network Unlock certificate can be verified in the Microsoft Management Console (MMC.exe) on the WDS server with the certificate snap-ins for the local computer enabled. The client certificate can be verified by checking the registry key HKEY_LOCAL_MACHINESoftwarePoliciesMicrosoftSystemCertificatesFVE_NKP on the client computer.
Group policy for Network Unlock is enabled and linked to the appropriate domains.
Verify group policy is reaching the clients properly. This can be done using the GPRESULT.exe or RSOP.msc utilities.
Volvo vida 2012a rapidshare files. Verify the clients were rebooted after applying the policy.
Verify the Network (Certificate Based) protector is listed on the client. This can be done using either manage-bde or Windows PowerShell cmdlets. For example the following command will list the key protectors currently configured on the C: drive of the local computer:
Note
Use the output of manage-bde along with the WDS debug log to determine if the proper certificate thumbprint is being used for Network Unlock
Files to gather when troubleshooting BitLocker Network Unlock include:
The Windows event logs. Specifically the BitLocker event logs and the Microsoft-Windows-Deployment-Services-Diagnostics-Debug log
Debug logging is turned off by default for the WDS server role, so you will need to enable it first. You can use either of the following two methods to turn on WDS debug logging.
Start an elevated command prompt and run the following command:
Open Event Viewer on the WDS server.
In the left pane, click Applications and Services Logs, click Microsoft, click Windows, click Deployment-Services-Diagnostics, and then click Debug.
In the right pane, click Enable Log.
The DHCP subnet configuration file (if one exists).
https://truekload991.weebly.com/stockfolio-stocks-portfolio-1-4-2.html. The output of the BitLocker status on the volume, this can be gathered into a text file using manage-bde -status or Get-BitLockerVolume in Windows PowerShell.
Network Monitor capture on the server hosting the WDS role, filtered by client IP address.
Configure Network Unlock Group Policy settings on earlier versions
Network Unlock and the accompanying Group Policy settings were introduced in Windows Server 2012 but can be deployed using operating systems running Windows Server 2008 R2 and Windows Server 2008.
Requirements
- The server hosting WDS must be running any of the server operating systems designated in the Applies To list at the beginning of this topic.
- Client computers must be running any of the client operating systems designated in the Applies To list at the beginning of this topic.
The following steps can be used to configure Network Unlock on these older systems.
Configure registry settings for Network Unlock:
Apply the registry settings by running the following certutil script (assuming your network unlock certificate file is called BitLocker-NetworkUnlock.cer) on each computer running any of the client operating systems designated in the Applies To list at the beginning of this topic.
- Set up a TPM protector on the clients
- Reboot the clients to add the Network (Certificate Based) protector
See also
